Categories
Groundwork Paving

Upgrading a Manhole Cover in Long Eaton: Step-by-Step Replacement Guide

An old, damaged, or ill-fitting drain cover isn’t just an eyesore—it poses a serious tripping hazard and can allow unpleasant drain odours or surface water to compromise your property. We recently completed a manhole lid replacement job for a client in Long Eaton, restoring both safety and functionality to their outdoor space.

The Project Scope

The original installation had seen better days, requiring a complete frame and cover replacement. Accessing the brick-built inspection chamber meant carefully removing the surrounding compromised concrete without damaging the underlying brickwork or pipe channels.

Before we could start we had to cut a padlock off the gate (new padlock and keys delivered to householder and estate agent)

Here is how the repair was executed step-by-step:

  1. Excavation & Frame Prep: We cut back the damaged concrete around the perimeter using a disc cutter to create a clean boundary. The old frame was removed, exposing the brick inspection chamber beneath.
  2. Setting the New Frame: A fresh bed of high-strength mortar was laid directly onto the brickwork to ensure a level, watertight seal. The new recess frame was positioned flush with the surrounding ground level.
  3. Haunching & Concrete Fill: Fresh concrete mix was troweled smoothly around the frame to anchor it firmly into place, ensuring it can withstand regular foot traffic without cracking or shifting.
  4. Fitting the Clark-Drain Lid: A durable, galvanized steel Clark-Drain cover complete with quick-release lifting handles was seated into the recessed frame for a flush finish.

Why Replace an Old Drain Cover?

  • Eliminate Trip Hazards: Sinking or cracked covers create dangerous uneven surfaces around side alleys and driveways.
  • Prevent Odours & Pest Access: A sealed, properly bedded frame keeps drain smells contained and deters rodents.
  • Durable & Weather-Resistant: Modern galvanized steel covers like Clark-Drain units offer superior rust protection compared to aging cast-iron covers.

Need drain repairs or manhole cover replacements in Long Eaton or surrounding areas? Contact us today for a quick quote!

Categories
Groundwork Paving

Paving concrete stairs

We need to make the concrete steps more attractive so we cut and installed 20mm porcelain slabs. it is possible to use internal tiles which are much easier to cut but we as they are normally less than 10 mm and afford to get underneath with the frost they can crack.

The main challenge with 20 mil slabs is cutting them because a large bench saw with a diamond blade is needed to cut them. The stairs also have a small nosing on them to give additional traction in the wet.

We will need to add a handrail to the stairs, we are using a system from FH bundle that bolts onto the side of the concrete step underneath.