Tag: repointing

Categories
Roofing

Gable end and dwarf wall repointing

Gable End and Dwarf Wall Repointing

We were recently called out by a customer whose existing gable end pointing had begun to weather and drop out over time. While we frequently recommend and install modern dry verge systems these days for a maintenance-free finish, this customer preferred to maintain the traditional mortar look for their roofline.

The stick isn’t permanent, just to supper whilst it’s drying out.

To ensure a high-quality, long-lasting repair, we carefully raked out all the old, loose mortar to create a solid base before expertly repointing the entire gable end. (Note: If you spot a stick in the photos, don’t worry—it’s definitely not a permanent fixture! It’s simply there to provide temporary support while the fresh mortar dries and sets into place).

While we were on site, we also tackled some essential maintenance on the customer’s dwarf wall. The coping stones had become loose, so we lifted them up, cleared away the old debris, and securely relaid them. The wall is now structurally sound and looking smart once again!

Categories
Brickwork Renovation

Brick wall repointing

The wall had been in place for approximately 130 years and needed some TLC. We removed the Staffordshire blue the coping  stones, repointed the wall and refitted the coping stones.

We used standard cement and yellow building sand, a few of the bricks could have been replaced but the client wished to patch up the wall to minimise expenditure. The work took 2 days for one of our skilled bricklayers to complete.

various bricks are blowing, but the customer wanted to minimise the spend so we simply patched up as best we could. Sometimes it is possible to chop out a blown brick and then use the other inward facing side on the outside. however in practice if the face of a brick has blown then when extracting the brick from the wall it tends to break up and can’t be reused.